Tripp Lite 8 Port 4K 60Hz HDMI Over Cat6 Extender Splitter Transmitter B127008H
Features Splitter Ideal for Digital Signage or Displaying Video in Schools or Trade Show Booths This eight-port transmitter/splitter is recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings and other digital signage applications where the source and display are farther apart than conventional A/V cables allow. The B127-008-H extends 4K video and stereo audio signals from an HDMI source device to eight HDMI displays up to 125 feet (38.1 meters) away via user-supplied Cat6 cabling. Built-In PoC Technology Provides Power to Avoid Bulky External Power Bricks Built-in Power over Cable (PoC) technology powers the connected B127-Series receivers over Cat6 cable. Green and orange LEDs will light up to indicate the unit is receiving power and a signal is being received. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to place the receivers away from an AC outlet. Transmits Crystal-Clear 4K HDMI Video with Multi-Channel Audio and 4:4:4 Color The B127-008-H supports Ultra HD video resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz with full, rich uncompressed DTS-HD, Dolby TrueHD and 7.1-channel digital audio. The transmitter is compatible with HDMI 2.0 standards for carrying HDR signals, which provide a wide range of vibrant colors with richer contrast, brighter whites and deeper blacks. HDCP 2.2 compliance allows you to stream iTunes and Netflix content with no complications. The B127-008-H also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor. Daisy-Chain Multiple Transmitters to Add More Displays An HDMI output is included for connecting up to three additional B127-008-H transmitters, each of which splits the original HDMI signal into eight. You can also connect an optional display to monitor the image connected to the receivers up to 125 feet away. Plug-and-Play Operation for Quick Setup and Immediate Use The included transmitter works right out of the box with no software required. Mounting hardware is included for installing the unit on a wall, pole or 19-inch rack. Connect the transmitter to the source with a user-supplied HDMI cable (such as Tripp Lite's P568- or P569-Series). Then, connect the transmitter to a Tripp Lite B127-100-H, B127-200-H or B127-100-H-SR remote receiver using Cat6 Ethernet cable (such as Tripp Lite N202-Series cable). TAA-Compliant for GSA Schedule Purchases The B127-008-H is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts. Typical Applications
System Requirements
|
Connectivity Technology: | Wired |
Number of Input Devices Supported: | 1 |
Number of Output Devices Supported: | 8 |
Maximum Operating Distance: | 125 ft |
Graphics Modes: | 4K UHD |
Maximum Video Resolution: | 3840 x 2160 |
Network (RJ-45): | Yes |
HDMI In: | Yes |
Number of Network (RJ-45) Ports: | 8 |
Number of HDMI Inputs: | 1 |
Media Type Supported: | Twisted Pair |
Twisted Pair Cable Standard: | Category 6 |
Color Family: | Black |
Product Color: | Black |
Transmitter Height: | 1.17" |
Transmitter Width: | 9.25" |
Transmitter Depth: | 3.97" |
Form Factor: | Wall Mountable |
Package Contents: |
|
Country of Origin: | Taiwan |
TAA Compliant: | Yes |
Environmental Compliance: | Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) |
Environmental Compliance: | Restriction of Hazardous Substances (RoHS) |
Limited Warranty: | 1 Year |
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov. |
- This item cannot be shipped to PO Boxes.
- This item can be shipped only within the U.S.
- UPC: 037332253781
- Mfr's Part #: B127-008-H