D-Link DPE-301GS 1-Port Gigabit PoE Splitter
From the Manufacturer|Powered by
Description
-
DPE-301GS PoE Splitter
The DPE-301GS PoE splitter is used with end devices such as wireless access points, IP cameras and VoIP phones that don’t natively support PoE, but rather require DC power input of 5V, 9V or 12V. It receives PoE power on a network cable from a PoE switch or midspan injector, and splits the Ethernet and DC power into two separate cables. One cable provides the DC power, and the other cable provides the Ethernet signal. Users can select from 5VDC, 9VDC and 12VDC power for their device using a selectable DIP switch on the device.
The DPE-301GS PoE splitter is typically located near the end device. It has two 10/100/1000 RJ-45 ports. One port is for PoE IN, which is the network connection and is usually connected to a remote PoE switch or injector. The other port is for LAN OUT, which is the connection that provides the Ethernet signal to the end device. The DPE-301GS also has a 5.5mm DC OUT port. Two adapter cables are supplied; either one may be connected to this port, depending on whether 5.5mm or 3.8mm interface is required for the end device.
Features
Easy to Use
• Plug-and-Play with no software required
• Facilitates deployment of PoE devices where power outlets are not available
• Reduces installation and network equipment costs by eliminating the need for electrical wiring
• Provides power over existing network cabling to PoE devices such as access points, IP cameras, and IP phones
• Lightweight, compact and easy to install
Gigabit Connectivity
• 10/100/1000 interface provides flexibility for all types of connections
• Auto-negotiation on Ethernet ports
Reliability
• Supports 802.3af / 802.3at
• Overcurrent protection
PoE Splitter
• Converts incoming power from a PoE switch or injector to low-voltage DC power
• Ideal for non-PoE access points, IP cameras and VoIP phones
• Supports 5V, 9V and 12V via selectable switch
Images
Specifications
Technical Specifications
Ports
PoE and Data
Label: PoE IN
• IEEE 802.3 / 10BASE-T
• IEEE 802.3u / 100BASE-Tx
• IEEE 802.3ab / 1000BASE-T
• IEEE 802.3af / 802.3at
• Half/full-Duplex operation
• CSMA/CD
Data
Label: LAN OUT
• IEEE 802.3 / 10BASE-T
• IEEE 802.3u / 100BASE-Tx
• IEEE 802.3ab / 1000BASE-T
• Half/full-Duplex operation
• CSMA/CD
Physical and Environmental
Dimensions (L x W x H)
• 4.32 x 2.45 x 0.96 in. (109.8 x 62.2 x 24.5 mm)
Weight
• 3.46 ounces (98 grams)
Temperature
• Operating: 32°F to 122°F / 0° to 50°C
• Storage: -22°F to 158°F / -30°C to 70°C
Humidity
• Operating: 5% to 95% RH
• Storage 5% to 95% RH
Power Consumption
• Maximum: 32.4 Watts
LED Indicators
• Blue: Power On
• Green: Link On
DC Power Out
Switchable Output Voltage
• 5V DC, 2.5A max.
• 9V DC, 2A max.
• 12V DC, 2A max.100 - 240V, 50/60 Hz
Included Power Adapter Cables
• 5.5mm male to 5.5mm male
• 5.5mm male to 3.8mm male
PoE Features
Standards
• IEEE 802.3af, IEEE 802.3at
Emissions (EMI) and Safety Certifications
Certifications
• CE, FCC, VCCI, RCM, RoHS
Data Sheet
-
DPE-301GI Datasheet
Datasheet for DPE-301GI single port PoE InjectorPDF, 1.04MB, 5 pages
DPE-301GS PoE Splitter The DPE-301GS PoE splitter is used with end devices such as wireless access points, IP cameras and VoIP phones that don't natively support PoE, but rather require DC power input of 5V, 9V or 12V. It receives PoE power on a network cable from a PoE switch or midspan injector, and splits the Ethernet and DC power into two separate cables. One cable provides the DC power, and the other cable provides the Ethernet signal. Users can select from 5VDC, 9VDC and 12VDC power for their device using a selectable DIP switch on the device. The DPE-301GS PoE splitter is typically located near the end device. It has two 10/100/1000 RJ-45 ports. One port is for PoE IN, which is the network connection and is usually connected to a remote PoE switch or injector. The other port is for LAN OUT, which is the connection that provides the Ethernet signal to the end device. The DPE-301GS also has a 5.5mm DC OUT port. Two adapter cables are supplied; either one may be connected to this port, depending on whether 5.5mm or 3.8mm interface is required for the end device. |
Minimum Output Voltage: | 5 V DC |
Maximum Output Voltage: | 12 V DC |
Minimum Output Current: | 2 A |
Maximum Output Current: | 2.50 A |
Minimum Frequency: | 50 Hz |
Maximum Frequency: | 60 Hz |
Maximum Output Power: | 32.40 W |
Input Ports: | 1 x 10/100/1000Base-T |
Output Ports: | 1 x 10/100/1000Base-T |
Form Factor: | External |
Height: | 1" |
Width: | 2.5" |
Length: | 4.3" |
Weight (Approximate): | 3.46 oz |
Package Contents: |
|
Compatibility: |
|
Certifications & Standards: |
|
Environmentally Friendly: | Yes |
Country of Origin: | China |
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov. |
- This item cannot be shipped to PO Boxes.
- This item can be shipped only within the U.S.
Special Order Item
This item ships directly from the manufacturer and is not stocked in our warehouse. If stock is available at the manufacturer, the item will ship directly to you, usually within 7 - 15 business days.
Once the order has been sent to the manufacturer it can no longer be canceled.
If payment is made via credit card it will be charged before the order is sent to the manufacturer.
You must contact the manufacturer directly regarding returns and defective items.
We will contact you by email if the item is sold out or backordered (and we were unable to update the site before you placed the order) or if the item will be delayed longer than expected.
We have no control over the speed of the manufacturer's order processing, or whether they will honor your request to ship the item by any particular method.
- UPC: 790069416675
- Mfr's Part #: DPE-301GS