3M Commercial-Grade Masking Production Painting Tape Natural 20201ABK

Scotch® Commercial-Grade Masking Tape for Production Painting

Scotch® Contractor Grade Masking Tape is a general purpose masking tape designed for use on non-damageable surfaces. Use on vinyl, carpet, metal, and plastic for the protection you need to get the job done. This masking tape holds to surfaces for up to three days and then removes easily without leaving any sticky residue behind. For great paint results make sure the surface is clean, dry and dust-free so that the tape sticks properly. Next, apply the tape onto the surface while pressing down firmly as you go. And lastly, let the tape set for about 30 to 60 minutes before painting. Wait until the paint is dry to the touch before removing the tape. Lift it up by slowly pulling it back on itself, then removing at a 45-degree angle. Grade: Commercial; Core Size: 3"; Dispenser Included: No; Backing Material: Crepe Paper.

• Grade: Commercial
• Global Product Type: Masking Tape
• Core Size: 3"
• Dispenser Included: No
• Backing Material: Crepe Paper
• Tensile Strength: 20 lb/in
• Width: 0.94"
• Length: 60 yds
• Size: 0.94" x 60 yds
• Thickness: 5.2 mil
• Color(s): Natural
• Color Family: Beige
• Product Biodegradability in Days: 0
• Pre-Consumer Recycled Content Percent: 0%
• Post-Consumer Recycled Content Percent: 0%
• Total Recycled Content Percent: 0%

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

• This item cannot be shipped to PO Boxes.
• This item can be shipped only within the U.S.

• UPC: 021200228926 
• Mfr's Part #: 2020-1A-BK 

• Return Policy
• Shipping Methods
• Order Acceptance Policy