Tripp Lite 2km RJ45/SC Multimode Hardened Copper to Fiber Media Converter
- Item #:
- Category:
- Availability:
- Packaging:
- Platform:
- Condition:
- Brand:
For Government/Education/Business pricing, please call 440.355.8008
Features | Extends a Network Connection up to 2 km over SC Multimode Fiber Optic Cable This network media converter converts a copper Ethernet signal to a multimode fiber optic signal and extends it to a second network device up to two kilometers (1.2 miles) away. Because copper Cat5e/6 cables are limited to only 100 meters, it is more effective to couple the N784-H01-SCMM with multimode fiber cable to reach hubs, switches and other 10/100Base-TX/FX network devices located farther away. Auto-negotiation and automatic MDI/MDI-X configuration seamlessly connect devices without crossover cabling. Monitor Your Installation with Link Fault Signaling and Loop Back Functions Determine the health of your network connection via the Link Fault Signaling (LFS) and Loop Back functions. The LFS LED indicates when a copper or fiber cable has been severed or another cause of disruption in service has occurred. The Local Loop Back (LLB) and Remote Loop Back (RLB) functions ensure copper and fiber cables have been correctly installed. Use the DIP switches to control each function or turn them on or off. LEDs Indicate Installation Performance and Diagnostic Functions Easy-to-read LEDs on the side of the unit indicate essential status information, including network speed and connection, LFS diagnostics and unit power. Protective Metal Housing Built to Withstand a Variety of Hazards The hardened aluminum case is designed to operate in extreme temperatures ranging from -10 to 60 degrees Celsius (14 to 140 degrees Fahrenheit). It is protected from electrostatic discharge (ESD), radio frequency interference (RFI) and power surges. Hardware is included for wall or DIN mounting. Works in Tandem with Tripp Lite's N785-CH12 Chassis House and power up to 12 Tripp Lite media converters, including the N784-H01-SCMM, using the N785-CH12 12-port chassis (sold separately) to create an organized installation. TAA-Compliant for GSA Schedule Purchases The N784-H01-SCMM is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts. |
Total Number of Ports: | 2 |
Network (RJ-45): | Yes |
Number of Network (RJ-45) Ports: | 1 |
Number of SC Ports: | 1 |
SC Port Type: | Duplex |
Media Type Supported: | Twisted Pair |
Media Type Supported: | Optical Fiber |
Fiber Mode Supported: | Multi-mode |
Fiber Optic Wavelength: | 1310 nm |
Maximum Distance Supported: | 1.24 Mile |
Ethernet Technology: | Fast Ethernet |
Network Technology: | 10/100Base-TX |
Network Technology: | 100Base-FX |
Power Source: | AC Adapter |
Power Consumption: | 1.80 W |
Plug/Connector Type: | NEMA 1-15P |
Form Factor: | Wall Mountable |
Form Factor: | DIN Rail Mountable |
Form Factor: | Desktop |
Height: | 0.9" |
Width: | 2.9" |
Depth: | 4.3" |
Weight (Approximate): | 8.43 oz |
Package Contents: | - N784-H01-SCMM Transceiver/Media Converter
- L-shaped Bracket
- Rubber Foot
- SC Connector Cap
- External Power Supply with NEMA 1-15P Plug (Input: 100-240VAC, 50/60 Hz, 0.5A; Output: 12VDC 1.5A)
- DIN Rail Kit
- Wall-mounting Hardware
- Quick Start Guide
|
Environmentally Friendly: | Yes |
Environmental Compliance: | Restriction of Hazardous Substances (RoHS) |
Environmental Compliance: | Waste Electrical and Electronic Equipment Directive (WEEE) |
Country of Origin: | Taiwan |
TAA Compliant: | Yes |
| WARNING:
This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information, go to www.P65Warnings.ca.gov. |
Shipping Restrictions
- This item cannot be shipped to PO Boxes.
- This item can be shipped only within the U.S.
- UPC:
037332267016
- Mfr's Part #:
N784-H01-SCMM