Quality Products, Superior Service, Competitive Prices
Government  |  B2B  |  Education  |  Libraries  |  Subscribe  |  Blog

Black Box LPS500 Transceiver/Media Converter LPS500ASM10KLCR3

Black Box LPS500 Transceiver/Media Converter LPS500ASM10KLCR3
  • Item #:
  • Category:
  • Availability:
  • Packaging:
  • Platform:
  • Condition:
  • Brand:

For Government/Education/Business pricing, please call 440.355.8008


Your Price: $390.12
Qty:
Product Rating

0 star(s) (0 Ratings) Write a Review


General Information
  • Copper port auto negotiates for network speed and features Auto MDI-X for easy cabling.
  • LEDs indicate when it is feeding PoE power as well as when power is interrupted.

Connect Gigabit-speed fiber optic to a 10-/100-/1000-Mbps copper UTP segment while also powering 802.3af devices at the end of the CAT5 run. This PoE PSE Gigabit Media Converter from Black Box enables you to transparently connect copper cabling to single-mode fiber as an economical way to extend Ethernet communications well beyond the 100-meter (327-foot) CATx limit. In fact, it supports a maximum distance of 10 kilometers (6.2 miles).

Along with matching copper to interference-free fiber at Gigabit speeds, the converter doubles as power sourcing equipment (PSE) for Power over Ethernet (PoE) devices plugged in on the copper side. Using existing UTP cabling for both data communications and 48-VDC power simplifies a network application in terms of provisioning power and maintaining equipment. It's particularly ideal for locating equipment where electrical access is inconvenient or just too expensive to locate.

Install PoE-compatible security cameras and wireless access points in areas without any nearby power outlets while reducing your overall power consumption, too. Plus, the PoE PSE Gigabit Media Converter has extensive power management features, including overcurrent protection, undercurrent detection, minimum load sensing, and PSE MDI power enable/disable.

For reliable data communications, the media converter boasts link fault pass-through (LFP) capabilities, monitoring receives ports on both the fiber and copper sides for loss of signal. If signaling is lost on one media port, it automatically disables the transmit (TX) signal to the other media port. Additionally, a far-end fault (FEF) function enables the converter to cease sending a link pulse to a link partner if signaling on the fiber receive (RX) port is lost. The link partner will also synchronously stop sending data. This way, you don't lose valuable data transmitted over an invalid link.

Interfaces/Ports
Total Number of Ports:2
Network (RJ-45):Yes
Number of PoE (RJ-45) Ports:1
PoE Port Type:PSE
Number of LC Ports:1
LC Port Type:Duplex

Media & Performance
Media Type Supported:Twisted Pair
Media Type Supported:Optical Fiber
Fiber Mode Supported:Single-mode
Fiber Optic Wavelength:1310 nm
Maximum Distance Supported:2 km

Network & Communication
Ethernet Technology:Gigabit Ethernet
Network Technology:10/100/1000Base-T
Network Technology:1000Base-LX

Power Description
Power Source:AC/DC
Power Consumption:65 W
Frequency:50 Hz
Frequency:60 Hz

Physical Characteristics
Height:1.6"
Width:6.2"
Depth:5.2"
Weight (Approximate):1.30 lb

Miscellaneous
Country of Origin:Taiwan

Warranty
Limited Warranty:2 Year

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Be the first to review this product. Write a Review
Shipping Restrictions
  • This item cannot be shipped to PO Boxes.
  • This item can be shipped only within the U.S.

Special Order Item

This item ships directly from the manufacturer and is not stocked in our warehouse. If stock is available at the manufacturer, the item will ship directly to you, usually within 7 - 15 business days.

Once the order has been sent to the manufacturer it can no longer be canceled.

If payment is made via credit card it will be charged before the order is sent to the manufacturer.

You must contact the manufacturer directly regarding returns and defective items.

We will contact you by email if the item is sold out or backordered (and we were unable to update the site before you placed the order) or if the item will be delayed longer than expected.

We have no control over the speed of the manufacturer's order processing, or whether they will honor your request to ship the item by any particular method.



  • UPC: 822088150602 
  • Mfr's Part #: LPS500A-SM-10K-LC-R3